+8613924660244

What are the common chip removal methods in deep hole drilling?

Aug 15, 2025

Crystal Zhao
Crystal Zhao
Digital Manufacturing Specialist leveraging cutting-edge software to optimize production workflows and reduce costs.

As a leading supplier in the field of deep hole drilling, I've witnessed firsthand the critical role that effective chip removal plays in the success of any deep hole drilling operation. Deep hole drilling is a specialized machining process used to create holes with a high length-to-diameter ratio, often found in various industries such as aerospace, automotive, and energy. In this blog, I'll delve into the common chip removal methods in deep hole drilling, their advantages, limitations, and how they contribute to the overall efficiency and quality of the process.

Importance of Chip Removal in Deep Hole Drilling

Before we explore the different chip removal methods, it's essential to understand why chip removal is so crucial in deep hole drilling. During the drilling process, chips are generated as the cutting tool removes material from the workpiece. If these chips are not effectively removed from the hole, they can cause a range of problems, including:

  • Tool Wear and Breakage: Accumulated chips can rub against the cutting edge of the tool, increasing friction and wear. This can lead to premature tool failure and increased tooling costs.
  • Poor Surface Finish: Chips left in the hole can scratch the surface of the workpiece, resulting in a poor surface finish and dimensional inaccuracies.
  • Reduced Drilling Efficiency: The presence of chips can impede the flow of coolant and lubricant, reducing their effectiveness in cooling and lubricating the cutting zone. This can lead to increased cutting forces, higher temperatures, and slower drilling speeds.
  • Hole Quality Issues: Chips can cause the drill to deviate from its intended path, resulting in holes that are not straight or have inconsistent diameters.

To overcome these challenges, various chip removal methods have been developed to ensure that chips are efficiently removed from the hole during the drilling process.

Common Chip Removal Methods

1. Gun Drilling with Internal Chip Removal

Gun drilling is a widely used deep hole drilling method that employs a single-flute drill with a coolant passage through the center. The coolant is pumped under high pressure through the drill body and exits at the cutting edge, flushing the chips out of the hole through the flute. This internal chip removal method offers several advantages:

  • Efficient Chip Removal: The high-pressure coolant effectively flushes the chips out of the hole, preventing chip accumulation and ensuring smooth drilling operations.
  • Good Surface Finish: The continuous flow of coolant helps to cool and lubricate the cutting zone, reducing friction and heat generation. This results in a better surface finish and dimensional accuracy of the drilled hole.
  • Long Tool Life: By removing the chips from the cutting zone, gun drilling reduces tool wear and extends the tool life, leading to lower tooling costs.

However, gun drilling also has some limitations. It requires a specialized drilling machine and high-pressure coolant system, which can be expensive to set up and maintain. Additionally, the single-flute design of the drill limits the feed rate and productivity compared to other drilling methods.

For more information about the deep hole drilling process, you can visit Deep Hole Drilling Process.

2. BTA (Boring and Trepanning Association) Drilling

BTA drilling is another popular deep hole drilling method that uses a multi-flute drill with an external coolant supply. The coolant is pumped into the annular space between the drill body and the hole wall, and the chips are removed through the center of the drill. This method offers several advantages:

  • High Productivity: The multi-flute design of the drill allows for higher feed rates and faster drilling speeds, resulting in increased productivity compared to gun drilling.
  • Large Hole Diameters: BTA drilling can be used to drill holes with larger diameters (up to several hundred millimeters) compared to gun drilling, making it suitable for a wide range of applications.
  • Good Chip Control: The external coolant supply helps to flush the chips out of the hole, ensuring efficient chip removal and reducing the risk of chip jamming.

However, BTA drilling also has some limitations. It requires a more complex drilling machine and coolant system, which can be more expensive to set up and operate. Additionally, the external coolant supply can cause splashing and misting, which may require additional safety measures.

Deep Hole Drilling ProcessDeep Hole Drilling Process

3. Ejector Drilling

Ejector drilling is a variation of BTA drilling that uses an ejector mechanism to enhance the chip removal process. The ejector consists of a nozzle and a venturi tube, which creates a suction effect that helps to draw the chips out of the hole. This method offers several advantages:

  • Improved Chip Removal: The ejector mechanism increases the efficiency of chip removal, especially in deep holes or when drilling difficult-to-machine materials.
  • Reduced Coolant Consumption: Ejector drilling requires less coolant compared to other drilling methods, which can result in cost savings and environmental benefits.
  • Versatility: Ejector drilling can be used with a variety of drill geometries and cutting tools, making it suitable for a wide range of applications.

However, ejector drilling also has some limitations. It requires a specialized ejector system, which can be complex and expensive to install and maintain. Additionally, the suction effect of the ejector can be affected by the chip size and shape, which may require careful selection of the drill and cutting parameters.

4. Chip Breaking and Peck Drilling

Chip breaking is a technique used to control the size and shape of the chips generated during the drilling process. By breaking the chips into smaller pieces, they are easier to remove from the hole and less likely to cause chip jamming. Peck drilling is a related technique that involves periodically retracting the drill from the hole to clear the chips. This method offers several advantages:

  • Simple and Cost-Effective: Chip breaking and peck drilling can be implemented using standard drilling equipment without the need for specialized chip removal systems.
  • Suitable for Small Diameter Holes: These methods are particularly effective for drilling small diameter holes where other chip removal methods may not be practical.
  • Good for Difficult-to-Machine Materials: Chip breaking and peck drilling can help to overcome the challenges of drilling difficult-to-machine materials by reducing the chip size and preventing chip accumulation.

However, chip breaking and peck drilling also have some limitations. They can be time-consuming, especially for deep holes, as the drill needs to be retracted multiple times to clear the chips. Additionally, the repeated retraction of the drill can cause wear on the drill and the workpiece, which may affect the hole quality.

Choosing the Right Chip Removal Method

The choice of chip removal method depends on several factors, including the hole diameter, depth, material, and required surface finish. Here are some general guidelines to help you choose the right chip removal method for your application:

  • Small Diameter Holes: For small diameter holes (less than 10 mm), gun drilling with internal chip removal is often the preferred method due to its efficient chip removal and good surface finish.
  • Large Diameter Holes: For large diameter holes (greater than 10 mm), BTA drilling or ejector drilling may be more suitable due to their higher productivity and ability to handle larger chips.
  • Deep Holes: For deep holes with a high length-to-diameter ratio, gun drilling or ejector drilling may be the best choice as they offer better chip removal and control in deep holes.
  • Difficult-to-Machine Materials: When drilling difficult-to-machine materials such as stainless steel or titanium, chip breaking and peck drilling may be necessary to prevent chip accumulation and tool wear.

It's also important to consider the cost, complexity, and availability of the equipment and coolant systems required for each chip removal method. Consulting with a deep hole drilling expert or supplier can help you make an informed decision based on your specific requirements.

Conclusion

Effective chip removal is essential for successful deep hole drilling operations. By choosing the right chip removal method, you can ensure that chips are efficiently removed from the hole, reducing tool wear, improving surface finish, and increasing productivity. As a deep hole drilling supplier, we have the expertise and experience to help you select the most suitable chip removal method for your application. Whether you need gun drilling, BTA drilling, ejector drilling, or chip breaking and peck drilling, we can provide you with the high-quality equipment, tools, and support you need to achieve excellent results.

If you're interested in learning more about our deep hole drilling services or would like to discuss your specific requirements, please don't hesitate to contact us. We look forward to working with you to meet your deep hole drilling needs.

References

  • "Deep Hole Drilling Handbook" by Gunther Spur and Thilo Stoeferle
  • "Machining Fundamentals" by David A. Dornfeld
  • "Manufacturing Engineering and Technology" by Serope Kalpakjian and Steven R. Schmid

Send Inquiry