+8613924660244

How to reduce the cutting force in deep hole drilling?

Sep 23, 2025

James Li
James Li
Technical Director overseeing all CNC machining processes. Passionate about integrating cutting-edge technology to enhance production efficiency.

Hey there! As a supplier in the deep hole drilling business, I've seen firsthand how crucial it is to reduce cutting force during the deep hole drilling process. It not only improves the efficiency of the operation but also extends the lifespan of the tools and enhances the quality of the drilled holes. So, let's dive into some practical ways to achieve this.

1. Tool Selection and Design

One of the first steps in reducing cutting force is choosing the right drill bit. High - speed steel (HSS) and carbide are two common materials for deep hole drill bits. Carbide bits are generally more wear - resistant and can withstand higher cutting speeds, which can lead to reduced cutting force. For example, solid carbide gun drills are great for deep hole drilling as they offer excellent rigidity and cutting performance.

The design of the drill bit also matters a lot. A drill bit with a proper point angle can significantly reduce the cutting force. A smaller point angle, around 118 degrees, is often used for general drilling in various materials. It allows the drill bit to penetrate the material more easily, thus reducing the force required. Additionally, the flute design of the drill bit plays a role. Flutes are the spiral grooves on the drill bit that help in chip removal. A well - designed flute can ensure smooth chip evacuation, preventing chips from clogging the hole and increasing the cutting force.

You can learn more about the Deep Hole Drilling Process to understand how different tool designs impact the overall operation.

2. Cutting Parameters Optimization

The cutting parameters, including cutting speed, feed rate, and depth of cut, have a direct influence on the cutting force.

  • Cutting Speed: Increasing the cutting speed within a reasonable range can reduce the cutting force. When the cutting speed is too low, the drill bit may rub against the material rather than cut it cleanly, resulting in higher cutting force. However, if the cutting speed is too high, it can cause excessive tool wear and even breakage. So, it's essential to find the optimal cutting speed based on the material being drilled and the type of drill bit used. For example, when drilling aluminum, a relatively high cutting speed can be used compared to drilling stainless steel.
  • Feed Rate: The feed rate refers to the distance the drill bit advances into the material per revolution. A proper feed rate is crucial. If the feed rate is too low, the drill bit may dwell in the same area for too long, increasing the cutting force. On the other hand, if the feed rate is too high, it can cause the drill bit to overload and break. Generally, a moderate feed rate that is in line with the cutting speed and the material properties is recommended.
  • Depth of Cut: Limiting the depth of cut can also help reduce the cutting force. Instead of taking a large - depth cut in one go, multiple passes with smaller depths of cut can be made. This way, the drill bit has less material to cut at a time, reducing the overall cutting force.

3. Coolant and Lubrication

Using the right coolant and lubrication is another effective way to reduce cutting force. Coolants serve multiple purposes. Firstly, they help in dissipating the heat generated during the drilling process. High temperatures can increase the hardness of the material being drilled, making it more difficult to cut and thus increasing the cutting force. By cooling the drill bit and the workpiece, the material remains in a more malleable state, reducing the cutting force.

Secondly, coolants act as lubricants. They reduce the friction between the drill bit and the material, allowing the drill bit to move more smoothly through the material. There are different types of coolants available, such as water - based coolants and oil - based coolants. Water - based coolants are more environmentally friendly and offer good cooling properties, while oil - based coolants provide better lubrication. The choice of coolant depends on the material being drilled and the specific requirements of the drilling operation.

4. Workpiece Material Preparation

Proper preparation of the workpiece material can also contribute to reducing the cutting force. For example, if the material has a hard outer layer or surface irregularities, it can increase the cutting force when the drill bit starts to penetrate. Pre - machining operations such as facing or grinding the surface of the workpiece can create a smooth starting surface for the drill bit.

Heat treatment of the workpiece material can also be considered. Annealing the material can reduce its hardness and improve its machinability, thereby reducing the cutting force during deep hole drilling. However, heat treatment should be carefully planned as it can also affect other properties of the material.

5. Machine Tool Rigidity

The rigidity of the machine tool used for deep hole drilling is often overlooked but is very important. A rigid machine tool can better withstand the cutting forces without excessive vibration. Vibration during the drilling process can cause the drill bit to wander and increase the cutting force. It can also lead to poor hole quality and premature tool wear.

Ensuring that the machine tool is properly maintained, with all its components tightened and aligned, can improve its rigidity. Additionally, using fixtures to secure the workpiece firmly can also reduce vibration and thus help in reducing the cutting force.

6. Chip Management

Effective chip management is crucial for reducing cutting force. As mentioned earlier, chips that are not properly evacuated can clog the hole and increase the cutting force. There are several ways to manage chips. One is to use a drill bit with a suitable flute design, as discussed before. Another method is to use chip breakers. Chip breakers are features on the drill bit that break the long chips into smaller, more manageable pieces.

Deep Hole Drilling ProcessDeep Hole Drilling Process

Cycling the drill bit in and out of the hole during the drilling process can also help in chip evacuation. This allows the chips to be cleared from the hole regularly, preventing them from building up and increasing the cutting force.

7. Monitoring and Feedback

Finally, continuous monitoring of the drilling process and using feedback to make adjustments is essential. There are various sensors available that can measure parameters such as cutting force, torque, and temperature. By monitoring these parameters in real - time, any abnormal increases in cutting force can be detected early.

Based on the monitoring results, adjustments can be made to the cutting parameters, tool selection, or coolant flow. For example, if the cutting force suddenly increases, the cutting speed or feed rate can be adjusted, or the drill bit can be inspected for wear.

In conclusion, reducing the cutting force in deep hole drilling is a multi - faceted process that involves tool selection, parameter optimization, coolant use, workpiece preparation, machine tool management, chip management, and monitoring. By implementing these strategies, we can improve the efficiency and quality of the deep hole drilling process.

If you're in the market for deep hole drilling services or products and want to discuss how to optimize your drilling operations to reduce cutting force, feel free to reach out to us. We're here to help you find the best solutions for your specific needs.

References

  • Smith, J. (2018). Advanced Drilling Techniques. Drilling Press.
  • Brown, A. (2019). Coolants and Lubricants in Machining. Machining Journal.
  • Johnson, R. (2020). Machine Tool Rigidity and Its Impact on Machining. Machine Tool Magazine.

Send Inquiry