Precautions During CNC Machining Debugging Process

1. Edit, modify and debug the program. If it is the first trial cutting, a dry run must be performed to ensure that the procedure is correct.
2. Install and debug the fixture according to process requirements, and remove iron filings and debris from each positioning surface.
3. Clamp the workpiece according to the positioning requirements to ensure correct and reliable positioning. The workpiece must not become loose during processing.
4. Install the tool to be used. If it is a machining center, the tool location number of the tool on the tool magazine must be strictly consistent with the tool number in the program.
5. Calibrate the tool according to the programmed origin on the workpiece and establish the workpiece coordinate system. If multiple tools are used, the remaining tools will perform length compensation or tool tip position compensation respectively.