+8613924660244

CNC lathe installation method

Mar 02, 2024

1. Lifting and transportation
To lift and position the machine tool, special lifting tools provided by the manufacturer should be used, and other methods are not allowed. No special lifting tools are required. Wire ropes should be used to lift and position the parts in accordance with the instructions.
2. Foundation and location
The machine tool should be installed on a solid foundation and located away from the source of vibration; avoid sunlight and heat radiation; and be placed in a dry place to avoid the influence of moisture and airflow. If there is a vibration source near the machine tool, anti-vibration trenches must be installed around the foundation.
3. Installation of machine tools
The machine tool is placed on the foundation and should be leveled in a free state, and then the anchor bolts are evenly tightened. For ordinary machine tools, the level reading does not exceed 0.04/1000mm. For high-precision machine tools, the level reading does not exceed 0.02/1000mm. When measuring the installation accuracy, it should be carried out at a constant temperature, and the measuring tool needs to be used after a period of constant temperature time. When installing machine tools, every effort should be made to avoid installation methods that cause forced deformation of the machine tool. When installing a machine tool, certain parts of the machine tool should not be dismantled casually. The disassembly of parts may cause the redistribution of stress within the machine tool, thus affecting the accuracy of the machine tool.
4. Preparation before trial operation
After the machine tool geometric accuracy has passed the inspection, the entire machine needs to be cleaned. Use cotton or silk cloth soaked in detergent. Do not use cotton gauze or gauze. Clean off the anti-rust oil or anti-rust paint applied on the machine tool when it leaves the factory to protect the guide rail surface and processing surface. Clean the dust on the outer surface of the machine tool. Apply lubricant specified for machine tools on each sliding surface and working surface.
Carefully check whether all parts of the machine tool are oiled as required and whether there is enough coolant in the cooling box. Check whether the oil in the machine tool hydraulic station and automatic room lubrication device reaches the position specified by the oil level indicator.
Check whether the switches and components in the electrical control box are normal and whether the integrated circuit boards are in place.
When power is turned on, the centralized lubrication device is started, so that each lubricating part and the lubricating oil circuit are filled with lubricating oil. Make all preparations before each component of the machine tool moves.

Previous: No Information
Next: CNC lathe unpacking and acceptance
You Might Also Like

Send Inquiry